Advance Tube Engineering Provides...
Tube Fabricating and Tube Bending Services
QUICK QUOTE

Cutting and Bending of Aluminum Cooling Coil for the Medical Industry

Cutting & Bending of Aluminum Cooling CoilThis featured cooling coil, manufactured by Advance Tube Engineering, is intended for use within a medical application. In order to fabricate the cooling coil, Advance Tube worked with 6061 aluminum and used a combination of cutting, deburring, polishing, bending, and coiling. The product was also cleaned and inspected prior to packaging. With our superior operations and processes, we were able to meet and exceed our client's requirements, and we ensured we met the standards outlined in the customer-supplied print and 2D drawing. In total, we produced 800 cooling coils for this client.

We applied cutting and deburring to achieve a 24.625 inches length, and polished the ends. We then bent the coil, achieving a .500" bend radius, to comply with the print dimensions. The coil was flushed clean to ensure there wasn't any particulate or machining residue inside the tubing, and first article inspection was conducted to check cleanliness and dimension measurements. The final cooling coil measured .850 of an inch in height, with a coil outside diameter of 3.50 inches. We held tight tolerances throughout manufacturing, down to +/- .005 of an inch and .5 of a degree. Our flatness and concentricity tolerances were within +/- .005 of an inch. Upon completion, the order of aluminum cooling coils was delivered to our client in Goleta, California. To learn more about this project or others, please contact Advance Tube.

Project Highlights

Capabilities Applied/Processes
Cutting
Deburring
Polishing
Bending
Coiling
Cleaning
Inspection
Package
Overall Part Dimensions
Raw Material:
Tube O.D.: ø.250"
Wall Thickness: .035"
Finished:
Coil O.D.: ø3.50"
Coil Height: .850"
.500" Bend Radius
Tightest Tolerances
±.005"
±.5°
Flatness within .005"
Concentricity within .005"
Material Used 6061 Aluminum
Typical Operations
Cut & Deburr:
Cut and deburr to 24.625" Long
Polishing:
Polish Ends
Bending:
Bend and Coil to Dimensions on Print
Cleaning:
Coil must be Flushed Clean
Ensure no Particulate or Machining Residue Inside Tubing
In process testing performed First Article Inspection
  • Cleanliness
  • Measure All Dimensions
Material Certification
Industry for Use Medical
Volume 800 Units
Delivery Location Goleta, California
Standards Met Customer supplied print, 2D CAD Drawing
Product Name Cooling Coil

Back to top